Jining xunda pipe coating materials co., ltd.
| Type de paiement: | L/C,T/T,Western Union |
| Incoterm: | FOB,CFR,CIF |
| Quantité de commande minimum: | 2 Ton |
| transport: | Ocean,Air |
| Hafen: | QINGDAO,TIANJIN,SHANGHAI |
marque: Xunda
Certification: ISO9001
Color: Black
Heat Resistance: High Temperature
Waterproof: Waterproof
Application: Ceramic
Adhesive: Other
Base Material: Other
Type: Pressure-Sensitive Tape
Water Vapor Transmission Rate: ＜0.3 G/㎡/24h
Dielectric Strength: 35 KV
Water Absorptivity: 0.05%
Tensile Strength: 20MPa（2900 Psi）
ELONGATION: 550%
Peel Strength To Primed Steel: 85N/cm
Cathodic Disbondment: 10mm Radius
Volume Resistivity: ＞1.0 X 1016 Ohm.com
Softening Point: 85℃
Shrink Force: 240KPA(35 Psi)
| Unités de vente | : | Ton |
| Type de colis | : | Boîte de carton en papier d'exportation |
| Télécharger | : |
|
Composition du produit
Le ruban rétractable appliqué à chaud sur le pipeline (manche rétractable thermique) se compose de trois couches, de couche d'amorce, de couche adhésive, de support de film.
Amorce: époxy liquide, deux composants sans solvant.
Adhésif: Copolymère de résistance à haute résistance Adhésif
Souvent du film: Radiation Cross Linked. Polyéthylène de haute densité
caractéristiques du produit
Excellente résistance à la radiographie cathodique.
Protection contre la corrosion à long terme.
Non durcissant et non fissuré.
Application rapide et performances élevées.
Excellente résistance chimique
Excellente résistance aux forces de cisaillement
Protection mécanique et résistance à l'humidité.
Propriétés du produit
|
Backing |
||
|
Property |
Typical Value |
Test Method |
|
Tensile Strength |
20MPa(2900 psi) |
ASTM D-638 |
|
Elongation at Break |
550% |
ASTM D-638 |
|
Specific Gravity |
0.95 |
ASTM D-792 |
|
Hardness, Shore D |
48 |
ASTM D-2240 |
|
Dielectric Strength |
20 kv/mm |
ASTM D-149 |
|
Water Absorption |
0.05% |
ASTM D-570 |
|
Shrink Force |
240KPA(35 psi) |
ASTM D-638 |
|
Volume Resistivity |
1.0 x 1016 ohm.cm |
ASTM D-257 |
|
Adhesive |
||
|
Property |
Typical Value |
Test Method |
|
Softening Point |
85℃ |
ASTM E-28 |
|
Lap Shear |
40 psi |
ASTM D-1002 |
|
Heat shrinkable Tape |
||
|
Property |
Typical Value |
Test Method |
|
Peel to Steel |
85N/cm |
ASTM D-4541 |
|
Low Temperature Flexibility |
-20℃ |
ASTM D-2671 |
|
Cathodic Disbondment |
10mm radius |
ASTM G8,30days,@23℃ |
|
Impact Resistance |
Pass |
DIN EN 12068 |
|
Indentation Resistance |
Pass |
DIN EN 12068 |
|
Dielectric Breakdown |
35kv |
ASTM D-149 |
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now